CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4

See what our Experts say about this CE Smith Boat Trailer Parts

• Can 5' Roller Bunks Be Used in Place of 7' Bunk Boards for a 15' Sail Fish Center Console Boat
  We have had this come up before and the manufacturer stated that the CE Smith Roller Bunks for Boat Trailers # CE27710 would work for a 15' boat in place of your 7' bunk boards as long as the cross members are 56 inches or less. Which your 50" spread is. You can mount them to the existing bunk boards on your trailer or you can use the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks # CE10003G-4.
  view full answer...
  
• Roller Bunk Recommendation for Jet Ski Ramp
  For the 10 foot long bunks you have two sets of the CE Smith roller bunks part # CE27700 would work well for you. These can be mounted directly to the wooden bunks you have already or you can remove them and install them with the brackets part # CE10003G-4. The steel of these buns are galvanized which will do an excellent job preventing rust and corrosion. They would last longer than wood being constantly submerged.
  view full answer...
  
• Is There a Way to get a 14 Inch Bolster Bracket?
  We do have an option to get you to the 14 inches, but it will be parts that need to be purchased separately. So with that being said, the CE Smith Bolster Bracket # CE10102G will measure 12 inches tall and if paired with the CE Smith Swivel Bracket # CE10200G, it will get you to the 14 inches.
  view full answer...
• How To Choose the Correct Roller or Carpeted Bunk Boards for a Trailer
  The size of bunk board or bunk roller you will need for your boat trailer is based off the hull size. However, generally speaking the manufacturer knows what size roller/bunk works best for the boat/trailer. Therefore I recommend using the same size that the trailer came with but it wouldn't hurt to go a bit longer if you have room. If you are switching from rollers to carpeted bunk boards then I would go longer. For the carpeted bunk board option we have part # CE27800 which are 36" long,...
  view full answer...
  
• Can I Use Roller Bunks and Carpeted Bunk Boards Together on Boat Trailer
  I'll start off by saying that I've seen quite a few boat trailers that use a combination of rollers like the CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair # CE27710 and a carpeted bunk like the CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair # CE27845. The rollers definitely help if you're on a lot of shallow or steep boat ramps and combining the two gives you the best of both worlds, with the rollers on the bottom and boards...
  view full answer...
• How Would Roller Bunks Install on Karavan Boat Trailer
  Since the picture you submitted belongs to Karavan I can't post it here on our site, but if you check out the attached picture you can see how a very similar trailer had a set of rollers like the part # CE27710 installed. For a set of swivel brackets like what you see in the picture that are holding the bunks you'd then want the part # CE10003G-4. I also attached a couple install video links for you to check out as well.
  view full answer...
  
• Installation Of Roller Bunks On Karavan Boat Trailer
  If the brackets don't allow enough swivel to allow the roller bunks to fit flush on the boat, I recommend replacing the brackets with bolster brackets that will allow enough swivel like the CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4 # CE10000G-4. This bracket can be installed with CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4 # CE15283GA-4. You will want the proper fit for best load support and function.
  view full answer...
• How To Install Roller Bunks on a Malone Watersport Trailer
  In order to convert your Malone trailer from a roof rack on wheels to a full on boat trailer with roller guide-on's, I recommend using the CE Smith Roller Bunks for Boat Trailers part # CE27700 and CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks part # CE10003G-4. The crossbars and brackets will need to removed and then you can install the swivel brackets to the crossmembers and the bunk rollers to the swivel brackets. That said, you will still need u-bolts that match the...
  view full answer...
  
• Recommended Roller Bunks for Livingston 14 with Catamaran Hull
  Sounds like your trailer has fixed carpet-covered 2x4s that support the hulls and you want to replace them with roller bunks. The CE Smith Roller Bunks, # CE27700, that you referenced, would be a great option for your catamaran boat trailer. These roller bunks are 4 ft long and they can be mounted directly on top of your current wood bunks. You can also use the CE Smith Mounting Brackets, # CE10003G-4, if you want to replace the wood bunks with the roller bunks. For 5 ft roller bunks use...
  view full answer...
• Roller Bunks For Shorelander Boat Trailer And Lund Fury 1600 Aluminum Boat
  You have a couple of options for rollers on your Shorelander trailer. If you want to completely cover the 7 foot bunks you currently have, you can attach a 4 ft roller like part # CE27700, and cut another to cover the 7 ft board. If you do mount the roller bunks to the boards you currently have you will want to make sure your rollers for the bow are adjusted at the proper height to offer support for the boat when loaded. I have attached a link to our boat trailer parts. Another option...
  view full answer...
• Recommended Upgrades to CE Smith Boat Trailer Model 48810
  Upgrading the carpeted bunks on your CE Smith Boat Trailer to roller bunks like the CE Smith # CE27710 is a great way to upgrade the trailer. These will allow for much easier loading and launching of your boat and reduce the stress put on your hand winch during operation. These are 5-foot-long bunks that will work perfectly to replace the 5-foot bunk boards on the trailer. You can use the Bunk Brackets # CE10003G-4 to mount them to the trailer. It looks like the trailer is equipped with...
  view full answer...
  
• Recommended Roller Bunks For 26' Seaswirl Boat Weighing 4200lbs
  You could absolutely replace your standard wooden bunk boards with the CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair # CE27700 you were looking at, but since they have a 1500lb rating each you will need to make sure to use at least 3 pairs due to your boat being 4200lbs. These roller bunks will allow you to load your 26' Seaswirl much easier. The easiest way to install these is to just attach them directly to your existing bunk boards, but if...
  view full answer...
• What is Needed to Mount Roller Bunks in Boat Trailer
  You'll just need brackets in order to mount the CE Smith Roller Bunks for Boat Trailers - 4' Long # CE27700 and 5' Long # CE27710. Use the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks # CE10003G-4 with CE Smith U-Bolts # CE15283GA-4.
  view full answer...
• Can 5 Foot Roller Bunks & Carpet Bunks be Installed Together
  Sure, if you have the room and you'd like to you can install 5 foot roller bunks and carpeted bunks together: - CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long # CE27820 - CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long # CE27710 For the roller bunks you'll need CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks # CE10003G-4 along with the appropriate size U-bolts, and I've added a link below to our selection so you can get the right size. The...
  view full answer...
• Recommended Bunk Rollers And Hardware For 18.5 Foot Bass Boat
  No, one 5 foot long section is not enough for the support of your boat unless you will be using a combination of rollers and bunk boards. The CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair # CE27710 will work well for your 18.5 foot bass boat if you use 2 roller sections on each side. You can see a similar install in the video review I've attached. You can use two 4 foot long sections on each side and still support your boat well. For that...
  view full answer...
• Recommendation on Replacement Boat Trailer Bunks with Roller-Bunks
  Yes, can replace your current wooden bunks with a set of roller-bunks, like the CE Smith Roller Bunks # CE27710. Upgrading to roller-bunks will improve the loading and unloading of your boat. The roller are made of a heavy-duty rubber that will not only absorb the shock when loading and unloading your boat, but the rubber roller will protect the hull of your boat from scratches. CE Smith roller-bunks measure 5 feet long and will have 6 rollers installed on each bunk. The bunks have a...
  view full answer...
• Comparing Dutton-Lainson and CE Smith Roller Bunks
  There isn't a whole lot of difference between Dutton-Lainson roller bunks # DL21741 and CE Smith roller bunks # CE27710. Both have 5 foot long sections. Each section is rated for 1500 pounds. There are 6 rollers per section on both. Both are made with galvanized steel and heavy duty black rubber rollers. The main difference besides price is the shape of the rollers is not exactly the same. Either set can be mounted on a bunk or independently. To mount independently you would need the...
  view full answer...
• Converting Bunk Boards to Roller Bunks of 2019 Bayliner 195 Boat Trailer
  I recommend replacing your bunk boards with the CE Smith Roller Bunks you were looking at. We have the following sizes: -CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair # CE27700 -CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair # CE27710 You can choose the size or a combination of sizes based on the length of your current boards. You have the option to mount these on your existing bunk boards or you can use...
  view full answer...
• Can Roller Bunks be Used to Replace Carpeted Bunks
  The CE Smith Roller Bunks, # CE27700, that you referenced would be a great option for your boat trailer. These roller bunks are 4 ft long and they can be mounted directly on top of your current wood bunks. You can also use the CE Smith Mounting Brackets, # CE10003G-4, if you want to replace the wood bunks with the roller bunks. Keep in mind, these bunks have a weight capacity of 1,500 lbs.
  view full answer...
• Parts Needed to Convert Boat Trailer to EOH Disc Brake Operation
  You can get a good handle on the process of converting your hydraulic drum-brake-equipped trailer to electric-over-hydraulic (EOH) disc brake operation by having a look at the linked article. This recaps each of the necessary items, one of which you already have, the brake controller. You will need to ensure you controller has the option for EOH operation; not all trailer brake controllers work with EOH actuators. The article has links to all the required items. You'll want to confirm your...
  view full answer...
• Recommended Bunk Board Brackets
  We definitely have options for brackets to mount your bunk boards. This will depend on the size needed, of course, but here are a couple options for you to take a look at. The CE Smith # CE10003G-4 will come as a 4 pack and are 11 inches tall, including the swivel bracket on the top. If you need a little more height, the # CE10002G-4 will be much the same, but measure 13 inches. The swivel bracket on the top pf these will let you angle your bunk boards to the angle that suits your needs best.
  view full answer...
• Best 5 Foot Roller Bunks for a Jet Ski Trailer
  Yes, we do have a set of 5 foot roller bunks. They are the CE Smith Roller Bunks for Boat Trailers item # CE27710. These bunks have six rollers each, are 5' long, and have a 1,500 lbs capacity. These roller bunks come in pairs and will be perfect for your jet ski. You will also need the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks item # CE10003G-4 to attach the roller bunks to your jet ski trailer.
  view full answer...
• When Using Two Sets Of CE Smith Roller Bunks For Boat Trailers Is Weight Capacity Increased
  I called my contact at CE Smith about the Roller Bunks for Boat Trailers, part # CE27700. They said since you are planning on using 4 bunks instead of 2, the rollers would have no problem with the additional 500 lbs as you described, as long as the weight is distributed evenly on the roller bunks. These roller bunks can be attached to wooden bunks or you may want to use swivel brackets like part # CE10003G-4. If you need U-bolts I recommend part # CE15283GA-4 for 4 U-bolts. For 4...
  view full answer...
• Recommended Rollers for Pontoon Boat Trailer with Wooden Bunk Boards
  The CE Smith Roller Bunks for Boat Trailers part # CE27710 will work great on a pontoon boat, they can either be mounted to the wooden bunk boards or attached directly to the frame using Swivel Brackets part # CE10003G-4. There will be more support if you mount them directly to the bunk boards but this will raise the height of the boat by about 3". If this is too much then you can use the swivel brackets which are height adjustable. You'll need one set of rollers per bunk board if you...
  view full answer...
  

Do you have a question about this Boat Trailer Part?